Warning: download and use of these files is at your own risk! Most of these files were downloaded at www.DriverGuide.com, and neither DriverGuide.com or FreeStuffandMoney.com have checked these files out. DriverGuide.com assumes no responsibility for personal or property damage associated with using these files, and neither does FreeStuffandMoney.com. We recommend that you check these files for viruses before using. I have also been told that their are additional Bernoulli Drivers are available at: http://www.cometenterprises.com/ (drivers tab on left). |
Manufacturer |
Device Type |
Model |
Driver Name |
Operating System |
Location |
Comments |
Submitted By |
Date |
---|---|---|---|---|---|---|---|---|
Manufacturer Iomega |
Type Removable Drives |
Model Any Bernoulli Box |
Driver Name Bernoulli Drv 3.11.zip |
OS Windows 3.1 |
Location |
Comments For those of you that are into Retro-Puting. This driver came straight from IOMEGA before they closed the page down. |
Submitted By Gerald C. Hoskowicz |
Date Sat Mar 10 11:09:55 EST 2001 |
Manufacturer Iomega |
Type Removable Drives |
Model |
Driver Name Bernoulli Drv 9X.zip |
OS Windows 95 & Windows 98 |
Location http://www2.driverguide.com/uploads/uploads9/13557.html or Local Copy |
Comments For those of you that are into Retro-Puting. This driver came straight from IOMEGA before they closed the page down. |
Submitted By Gerald C. Hoskowicz |
Date Sat Mar 10 11:24:12 EST 2001 |
Manufacturer Iomega |
Type Removable Drives |
Model All Bernoulli |
Driver Name Bernoulli Drv NT.zip |
OS Windows NT |
Location http://www2.driverguide.com/uploads/uploads9/13564.html or Local Copy |
Comments For those of you that are into Retro-Puting. This driver came straight from IOMEGA before they closed the page down. |
Submitted By Gerald C. Hoskowicz |
Date Sat Mar 10 11:34:21 EST 2001 |
Manufacturer Iomega |
Type Removable Drives |
Model Bernoulli 8 |
Driver Name mac353.hqx |
OS Mac OS |
Location http://www2.driverguide.com/uploads/uploads11/26856.html or Local Copy |
Comments Install the driver, do not put a disk in the drive until after the computer is rebooted and drive setup has been run. Go to utilities, click on drive setup, then click on unknown drive and it will find the driver for the Bernoulli drive. |
Submitted By Sandy Turck |
Date Tue Dec 4 23:55:37 EST 2001 |
Manufacturer Gateway |
Type Other |
Model |
Driver Name Anykey34.exe |
OS Windows 95 |
Location http://www2.driverguide.com/uploads/uploads6/1764.html or Local Copy |
Comments Don't know anything about this driver but as far as I know it works as is. |
Submitted By Frank Taylor |
Date Sat Mar 4 09:19:54 EST 2000 |
Manufacturer Gateway |
Type Input Devices |
Model 2189014-00-212 |
Driver Name anykeyutility.exe |
OS DOS |
Location http://www2.driverguide.com/uploads/uploads10/10725.html or Local Copy |
Comments Does anybody have Windows version for this software? |
Submitted By Shamim Khan |
Date Tue Jul 17 11:40:32 EDT 2001 |
Manufacturer Gateway |
Type Input Devices |
Model |
Driver Name Anykey34.exe |
OS DOS |
Location http://www2.driverguide.com/uploads/uploads10/10730.html or Local Copy |
Comments Please post it if anyboby have any other version for this software. shamimulkhan@hotmail.com |
Submitted By Shamim Khan |
Date Tue Jul 17 11:51:43 EDT 2001 |
Manufacturer Gateway |
Type Input Devices |
Model 2189014-00-211, -212, -712, 2191011-99-911 |
Driver Name anykeyutility.exe |
OS DOS |
Location http://www2.driverguide.com/uploads/uploads10/12344.html or Local Copy |
Comments [FCCID=MaxiSwitch or AnyKey Programmable Keyboard] I have posted 4 different versions of the AnyKey software in this link. They are "anykeyutility.exe" / "anyky30.exe" / "ayky32.exe" / "anykey34.exe". Try all of these four different versions separately for your keyboard. Depending on the version of your keyboard at least one of these four should work. All of these programs are DOS based softwares and they only work properly if you boot up the computer in a DOS command mode and then run the AnyKey program. If you try to run them from within Windows environment, the computer might freeze or the keyboard might lock up. I couldn't find a Windows-based software for these keyboards. If anybody ever find any info about them, please post them here or email me back at "shamimulkhan@hotmail.com". Thanks. |
Submitted By Shamim Khan |
Date Wed Jul 25 14:23:15 EDT 2001 |
Manufacturer Gateway |
Type Input Devices |
Model 2189014-00-211, -212, -712, 2191011-99-911 |
Driver Name anyky30.exe |
OS DOS |
Location http://www2.driverguide.com/uploads/uploads10/12352.html or Local Copy |
Comments I have posted 4 different versions of the AnyKey software in this link. They are "anykeyutility.exe" / "anyky30.exe" / "ayky32.exe" / "anykey34.exe". Try all of these four different versions separately for your keyboard. Depending on the version of your keyboard at least one of these four should work. All of these programs are DOS based softwares and they only work properly if you boot up the computer in a DOS command mode and then run the AnyKey program. If you try to run them from within Windows environment, the computer might freeze or the keyboard might lock up. I couldn't find a Windows-based software for these keyboards. If anybody ever find any info about them, please post them here or email me back at "shamimulkhan@hotmail.com". Thanks. |
Submitted By Shamim Khan |
Date Wed Jul 25 14:26:28 EDT 2001 |
Manufacturer Gateway |
Type Input Devices |
Model 2189014-00-211, -212, -712, 2191011-99-911 |
Driver Name ayky32.exe |
OS Not Specified |
Location http://www2.driverguide.com/uploads/uploads10/12356.html or Local Copy |
Comments [FCCID=MaxiSwitch or AnyKey Programmable Keyboard] I have posted 4 different versions of the AnyKey software in this link. They are "anykeyutility.exe" / "anyky30.exe" / "ayky32.exe" / "anykey34.exe". Try all of these four different versions separately for your keyboard. Depending on the version of your keyboard at least one of these four should work. All of these programs are DOS based softwares and they only work properly if you boot up the computer in a DOS command mode and then run the AnyKey program. If you try to run them from within Windows environment, the computer might freeze or the keyboard might lock up. I couldn't find a Windows-based software for these keyboards. If anybody ever find any info about them, please post them here or email me back at "shamimulkhan@hotmail.com". Thanks. |
Submitted By Shamim Khan |
Date Wed Jul 25 14:32:58 EDT 2001 |
Manufacturer Gateway |
Type Input Devices |
Model 2189014-00-211, -212, -712, 2191011-99-911 |
Driver Name Anykey34.exe |
OS Not Specified |
Location http://www2.driverguide.com/uploads/uploads10/12357.html or Local Copy |
Comments [FCCID=MaxiSwitch or AnyKey Programmable Keyboard] I have posted 4 different versions of the AnyKey software in this link. They are "anykeyutility.exe" / "anyky30.exe" / "ayky32.exe" / "anykey34.exe". Try all of these four different versions separately for your keyboard. Depending on the version of your keyboard at least one of these four should work. All of these programs are DOS based softwares and they only work properly if you boot up the computer in a DOS command mode and then run the AnyKey program. If you try to run them from within Windows environment, the computer might freeze or the keyboard might lock up. I couldn't find a Windows-based software for these keyboards. If anybody ever find any info about them, please post them here or email me back at "shamimulkhan@hotmail.com". Thanks. |
Submitted By Shamim Khan |
Date Wed Jul 25 14:34:50 EDT 2001 |